Cầu dao BV-D2P40A Aptomat Mitsubishi

Liên hệ

Mã sản phẩm BV2P40030N
Đáp ứng tiêu chuẩn IEC61008-2-2
Dòng rò định mức: 30, 300mA
Điện áp làm việc 230/400VAC
Sử dụng công nghệ bảo vệ dòng rò

Thông tin
Catalogue

Cầu dao BV-D2P40A Aptomat Mitsubishi. Là cầu dao loại nhỏ được sản xuất dựa trên tiêu chuẩn IEC

Thông tin đặt hàng Cầu dao BV-D2P40A Aptomat Mitsubishi

Dòng sản phẩm

Model		No. of poles (P)	Rating	Instantaneous tripping	Voltage (V)	Breaking capacity (kA)	Standard
MCB	BH-D6	1, 2, 3, 4 (3+N)	0.5～63A	TYPE B, C, D	230/400AC	6	IEC60898-1
	BH-D6	1+N	0.5～40A	TYPE B, C	230AC	6	IEC60898-1
	BH-D10	1, 2, 3, 4 (3+N)	0.5～63A	TYPE B, C, D	230/400AC	10	IEC60898-1
	BH-D10 (for DC)	1	0.5～63A	TYPE B, C	125DC	10	IEC60898-2
	BH-D10 (for DC)	2	0.5～63A	TYPE B, C	250DC	10	IEC60898-2
	BH-DN	1+N	6～20A	TYPE C	230AC	4.5	IEC60898-1
RCCB	BV-D	2(1+N), 4(3+N)	25, 40, 63A	–	230/400AC	–	IEC61008
RCBO	BV-DN	1+N	6～40A	TYPE C	230AC	4.5	IEC61009
Isolating Switch	KB-D	1, 2, 3, 4 (3+N)	32, 63, 80A	–	230/400AC	–	IEC60947-3

Explanation of Markings (Example Model : BH-D6)

Cầu dao BH-D61P16A Aptomat Mitsubishi

Thông số kỹ thuật

∗1: N pole is a switched neutral pole (without overcurrent release device).
∗2: Type C: (5 In <, 10 In)
∗3: For use to three phase 4-wire type. When wiring to three phase 4-wire, connect the neutral line to the neutral pole. Not available for use to three phase 3-wire type.

Model	BV-D
No. of poles [P]	2(1+N)^*¹	4(3+N)^¹^²
Rated operational voltage Ue [AC V]	230	230/400
Rated current In [A] at ambient temperature 30°C	25, 40, 63
^{Rated residual operating current}^ID n ^[mA]	30, 300
^{Max. operating time at 5}^ID n ^[s]	0.04
Pulsating current sensitivity	Type AC
Residual operation	Dependent on line voltage
Rated making and breaking capacity Im [A]	500 (In 25,40A) 630 (In 63A)
Rated conditional short-circuit current Inc [kA]	6
^{Rated residual making and breaking capacity}^ID m ^[A]	500 (In 25,40A) 630 (In 63A)
^{Rated conditional residual short-circuit current}^ID c ^[kA]	6
^{1: N pole is a switched neutral pole (without overcurrent release device).}^{2: For use to three phase 4-wire type. When wiring to three phase 4-wire, connect the neutral}line to the neutral pole. Not available for use to three phase 3-wire type.