Vòng bi Standard linear ball bearings - LBHTVòng bi Standard linear ball bearings - LBHT

Standard linear ball bearings – LBCT

Liên hệ

– Closed design
• Sizes from 5 mm to 80 mm
• Straight raceway design to support high loads
• Available in variants of 2 seals, 2 shields or seal and shield
• Available as bearing steel (standard) or stainless steel variant
• Factory pre-lubricated with SKF LGEP 2 grease, ready for use
• Clearance or preload determined by shaft and housing bore
tolerance, in slotted housings adjustable
• Suitable grease fittings for axial fixation

Standard linear ball bearings – LBCT | Đai ốc vít me Ball bearing Ewellix được sử dụng rộng rãi trong nhiều ứng dụng khác nhau, yêu cầu độ chính xác cao.

Standard linear ball bearings – LBCT

– Open design
• Sizes from 12 mm to 80 mm
• Open design for long strokes together with supported shafts
• Straight raceway design to support high loads
• Available in variants of 2 seals, 2 shields or seal and shield
• Available as bearing steel (standard) or stainless steel variant
• Factory pre-lubricated with SKF LGEP 2 grease, ready for use
• Clearance or preload determined by shaft and housing bore tolerance,
adjustable in Ewellix units
• Suitable grease fittings for axial fixation

Cấu tạo đai ốc vít me loại tiêu chuẩn Ewellix

Catalog trục trượt tròn và bạc trượt tròn
Catalog trục trượt tròn và bạc trượt tròn

Sản phẩm liên quan

  • Vòng bi Standard linear plain bearings - LPAR LPAT

    Standard linear plain bearings – LPAR & LPAT

    Thông số kĩ thuật Standard linear plain bearings – LPAR LPAT

    Closed and open design

    Sizes from 5 mm to 80 mm in closed design and from 12 mm to 80 mm in open design

    Dimensionally interchangeable with LBC linear bearings

    Self-lubricating material

    Liên hệ Đọc tiếp
  • Vòng bi Standard linear ball bearings - LBCF

    Standard linear ball bearings – LBCF

    Thông số kĩ thuật Standard linear ball bearings – LBCF

    Sizes from 12 mm to 50 mm

    Open design for long strokes together with supported shafts

    Possible tilting angle of ±30 minutes of arc (self-aligning)

    Available in variants of 2 seals, 2 shields or seal and shield

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Standard quadro units - LQCR LQCD

    Standard quadro units – LQCR & LQCD

    Thông số kĩ thuật Standard quadro units – LQCR LQCD

    Closed design in sizes from 8 mm to 50 mm

    Aluminium housing with 4 mounted bearings

    Available as sealed or shielded variant

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Vòng bi Standard linear ball bearings - LBCD

    Standard linear ball bearings – LBCD

    Thông số kĩ thuật Standard linear ball bearings – LBCD

    Closed design, self-aligning

    Sizes from 12 mm to 50 mm

    Possible tilting angle of ±30 minutes of arc (self-aligning)

    Available in variants of 2 seals, 2 shields or seal and shield

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Vòng bi Standard linear units - LUCR LUCD

    Standard linear units – LUCR & LUCD

    Thông số kĩ thuật Standard linear units – LUCR LUCD

    Closed design in sizes from 8 mm to 80 mm

    Lightweight die-cast aluminium housing

    Available in variants of 2 seals or 2 shields

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Trục Linear slides - LZBU A

    Linear slides – LZBU A

    Sizes from 8 mm to 50 mm

    Equipped with 4 self-aligning LBCD bearings

    Sealed standard and stainless steel variant

    Factory pre-lubricated with SKF LGEP 2 grease, ready for use

    Liên hệ Đọc tiếp