Trục Linear slides - LZAUTrục Linear slides - LZAU

Linear slides – LZAU

Liên hệ

• Open design from sizes 12 mm to 50 mm
• Equipped with 4 self-aligning LBCF bearings
• Sealed standard and stainless steel variant
• Factory pre-lubricated with SKF LGEP 2 grease, ready for use
• Equipped with grease fittings on both sides
• Quadro unit able to bolt from top or bottom side
• Standard slides consist of the following parts:
– One standard quadro unit LQCF -2LS
– Two precision shafts LJM of the defined length supported by LRCB shaft supports
– Stainless slides with LQCF -2LS/HV6 variant and LJMR precision shafts

Linear slides – LZAU | Đai ốc vít me Ball bearing Ewellix được sử dụng rộng rãi trong nhiều ứng dụng khác nhau, yêu cầu độ chính xác cao.

• Open design from sizes 12 mm to 50 mm
• Equipped with 4 self-aligning LBCF bearings
• Sealed standard and stainless steel variant
• Factory pre-lubricated with SKF LGEP 2 grease, ready for use
• Equipped with grease fittings on both sides
• Quadro unit able to bolt from top or bottom side
• Standard slides consist of the following parts:
– One standard quadro unit LQCF -2LS
– Two precision shafts LJM of the defined length supported by LRCB shaft supports
– Stainless slides with LQCF -2LS/HV6 variant and LJMR precision shafts

 

Catalog trục trượt tròn và bạc trượt tròn
Catalog trục trượt tròn và bạc trượt tròn

Sản phẩm liên quan

  • Standard quadro units - LQCR LQCD

    Standard quadro units – LQCR & LQCD

    Thông số kĩ thuật Standard quadro units – LQCR LQCD

    Closed design in sizes from 8 mm to 50 mm

    Aluminium housing with 4 mounted bearings

    Available as sealed or shielded variant

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Vòng bi Standard quadro units - LQCT LQCF

    Standard quadro units – LQCT & LQCF

    Thông số kĩ thuật Standard quadro units – LQCT LQCF

    Open design in sizes from 12 mm to 50 mm

    Aluminium housing with 4 mounted bearings

    Available as sealed or shielded variant

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Gối đỡ trục Standard housings - LHCT

    Standard housings – LHCT

    Open design in sizes from 12 mm to 80 mm

    Lightweight die-cast aluminium housing

    Able to bolt from top or bottom side

    With reference side for linear alignment

    Liên hệ Đọc tiếp
  • Trục Linear slides - LZBU A

    Linear slides – LZBU A

    Sizes from 8 mm to 50 mm

    Equipped with 4 self-aligning LBCD bearings

    Sealed standard and stainless steel variant

    Factory pre-lubricated with SKF LGEP 2 grease, ready for use

    Liên hệ Đọc tiếp
  • Vòng bi Standard linear ball bearings - LBHT

    Standard linear ball bearings – LBCT

    Thông số kĩ thuật Standard linear ball bearings – LBCT

    Sizes from 12 mm to 80 mm

    Open design for long strokes together with supported shafts

    Straight raceway design to support high loads

    Available in variants of 2 seals, 2 shields or seal and shield

    Available as bearing steel (standard) or stainless steel variant

    Liên hệ Đọc tiếp
  • Standard tandem shaft blocks- LEAS

    Compact tandem shaft blocks – LEAS

    Sizes from size 8 mm to 50 mm in aluminium material

    Shaft clamping and bolt direction from the top

    LEAS A variant for moving quadro slide and fixed shaft blocks to surface

    LEAS B variant for moving shaft blocks and fixed quadro unit

    Liên hệ Đọc tiếp