Giải pháp tự động hóa công nghiệp
Chính xác, tin cậy, bên bỉ với sản phẩm và công nghệ truyền động tuyến tính đến từ SKF – EWELLIX – Thụy Điển
Liên hệ
– LSCS for compact or standard range
• Sizes from 8 mm to 80 mm
• Lightweight die-cast aluminium shaft block
• Shaft clamping screw direction from the top
• Able to bolt from top or bottom side to the surface
• Two different hole patterns for fixation
• Reference surface for linear alignment
• Precise and safe shaft fixation to the surface
Shaft blocks – LSCS | Đai ốc vít me Ball bearing Ewellix được sử dụng rộng rãi trong nhiều ứng dụng khác nhau, yêu cầu độ chính xác cao.
– LSCS for compact or standard range
• Sizes from 8 mm to 80 mm
• Lightweight die-cast aluminium shaft block
• Shaft clamping screw direction from the top
• Able to bolt from top or bottom side to the surface
• Two different hole patterns for fixation
• Reference surface for linear alignment
• Precise and safe shaft fixation to the surface
Thông số kĩ thuật Standard linear units – LUCS LUCE
Slotted design for adjustable clearance in sizes from 8 mm to 80 mm
Lightweight die-cast aluminium housing
Available in variants of 2 seals or 2 shields
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear ball bearings – LBCD
Closed design, self-aligning
Sizes from 12 mm to 50 mm
Possible tilting angle of ±30 minutes of arc (self-aligning)
Available in variants of 2 seals, 2 shields or seal and shield
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear ball bearings – LBCT
Sizes from 12 mm to 80 mm
Open design for long strokes together with supported shafts
Straight raceway design to support high loads
Available in variants of 2 seals, 2 shields or seal and shield
Available as bearing steel (standard) or stainless steel variant
Sizes from 12 mm to 50 mm
Shaft clamping screw direction from the side
Able to bolt from top or bottom side to the surface
Reference surface for linear alignment
Thông số kĩ thuật Standard linear ball bearings – LBCF
Sizes from 12 mm to 50 mm
Open design for long strokes together with supported shafts
Possible tilting angle of ±30 minutes of arc (self-aligning)
Available in variants of 2 seals, 2 shields or seal and shield
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard tandem units – LTCT LTCF
Open design in sizes from 12 mm to 50 mm
Aluminium housing with 2 mounted bearings
Available as sealed or shielded variant
Available as bearing steel (standard) or stainless steel variant
