Giải pháp tự động hóa công nghiệp
Chính xác, tin cậy, bên bỉ với sản phẩm và công nghệ truyền động tuyến tính đến từ SKF – EWELLIX – Thụy Điển
Liên hệ
• Designed for all open type linear bearings and units
• Sizes from size 12 mm to 50 mm in aluminium material
• For complete or partial shaft support
• Able to bolt from top or bottom side to the surface
• LRCB with Ewellix standard shaft hole pattern ESSC6
• LRCC machined for customised hole patterns
Standard shaft supports – LRCB & LRCC | Đai ốc vít me Ball bearing Ewellix được sử dụng rộng rãi trong nhiều ứng dụng khác nhau, yêu cầu độ chính xác cao.
• Designed for all open type linear bearings and units
• Sizes from size 12 mm to 50 mm in aluminium material
• For complete or partial shaft support
• Able to bolt from top or bottom side to the surface
• LRCB with Ewellix standard shaft hole pattern ESSC6
• LRCC machined for customised hole patterns
Thông số kĩ thuật Standard linear ball bearings – LBCT
Sizes from 12 mm to 80 mm
Open design for long strokes together with supported shafts
Straight raceway design to support high loads
Available in variants of 2 seals, 2 shields or seal and shield
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear units – LUCT BH
Open heavy duty design in sizes from 20 mm to 50 mm
Lightweight die-cast aluminium housing
Available in variants of 2 seals or 2 shields
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear units – LUCR LUCD
Closed design in sizes from 8 mm to 80 mm
Lightweight die-cast aluminium housing
Available in variants of 2 seals or 2 shields
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear ball bearings – LBCF
Sizes from 12 mm to 50 mm
Open design for long strokes together with supported shafts
Possible tilting angle of ±30 minutes of arc (self-aligning)
Available in variants of 2 seals, 2 shields or seal and shield
Available as bearing steel (standard) or stainless steel variant
Thông số kĩ thuật Standard linear plain bearings – LPAR LPAT
Closed and open design
Sizes from 5 mm to 80 mm in closed design and from 12 mm to 80 mm in open design
Dimensionally interchangeable with LBC linear bearings
Self-lubricating material
Sizes from 12 mm to 50 mm
Shaft clamping screw direction from the side
Able to bolt from top or bottom side to the surface
Reference surface for linear alignment
